|Room 414, Number 113,Gucheng west road,Shijingshan Diistrict,Beijing,China.||email@example.com|
Payment & Shipping Terms:
|Total Length:||4.5m||Maximum Grab Weight:||20kg|
|Maximum Open And Close Size:||20cm||Working Time:||Built-in High Efficiency Rechargeable Battery, Can Work Continuously For 5 Hours.|
|Device Weight:||The Total Weight Of The Packing Box Is About 41kg, And The Self-weight Of The Explosive Rod Is About 17.8kg.|
Power-Driven EOD Telescopic Manipulator
I Product Presentation
The EOD Telescopic Manipulator is mainly used in anti-terrorist EOD, which is used to remove explosive bags or suspected dangerous goods. The product can be used at a distance of 4.5 meters away from the explosive.Operators can easily grab and transfer dangerous and suspicious objects through video system.
The use of this product can reduce or eliminate the threat of explosive and other dangerous goods to staff.It can also be used in chemical industry, nuclear facilities and other fields, used in dispose of hazardous substances such as chemicals that cannot be directly touched by human body, so as to reduce unnecessary injury to personnel.
In order to better protect operators, operators should wear EOD or biochemical suits when performing high-risk tasks (EOD, biochemical).
|Maximum grab weight||20kg|
|Maximum open and close size||20cm|
|Working time||Built-in high efficiency rechargeable battery, can work continuously for 5 hours.|
|Device weight||The total weight of the packing box is about 41kg, and the self-weight of the explosive rod is about 17.8kg.|
|Operating temperature||-20℃ to +40℃|
|Device storage temperature||-30℃ to +60℃|
Operation and Use
In order to better protect operators, operators should wear correct EOD or biochemical suits when performing high-risk tasks (EOD, biochemical).The rotation and opening and closing of the EOD Telescopic Manipulator are realized by the switch located in the control box, and the working condition of the mechanical claw is monitored by the display screen.
1.Preparation: After the equipment is assembled and confirmed to be correct, the operator shall protect the equipment and push the equipment close to dangerous and suspicious objects at the rear of the equipment.
2.Grasp: Monitor the mechanical claw through the display screen, control the switch to adjust the Angle of the mechanical claw to open the mechanical claw from above to grasp dangerous and suspicious objects.
3.Transfer: after making sure to grasp the dangerous and suspicious objects, gently lift the mechanical claws and transfer the dangerous and suspicious objects to the open area or put them into a safe container (such as the explosive tank) according to the previously planned route.Please handle with care.
4.Evacuation: after transferring dangerous and suspicious objects, evacuate to a safe distance quickly.To further dispose of dangerous and suspicious items.
●After each use of the equipment, clean the water stains and dust on the surface of each part, cover the waterproof cap of each part, put it into the corresponding groove in the equipment box, cover the box and store it in a dry and light-proof environment.
●Use the original charger of the device for charging, the charging time is generally 5-8 hours.When charging, the indicator light on the charger is red, and when the indicator light changes to green, the charging is completed.
●After each use of the device, if the battery power display is lower than 12v, it needs to be charged.
●If you have not used the equipment for a long time, you need to charge the battery regularly, once every 3 months.
Matters Need Attention
●Do not rain for a long time.
●It is forbidden to block the motor for a long time.
●Do not install and disassemble by force.
●Do not approach the source of fire.
●Try not to open (close) the manipulator while rotating the manipulator.
Contact Person: Mr. Gerrywang